Agriculture Engineering
Farm Machinery :: Tillage Implements
 


Tractor Drawn Channel Former

 

1.

Function

:

To form channels and beds at regular intervals for irrigation.

2.

Specification

:

 

 

i. Type

:

Mounted implement

 

ii.Power requirement

:

35-45 HP 

 

iii.Overall dimensions

:

2200  x 1126  x 900 mm

 

iv. Weight

:

90 kg

 

v. Capacity

:

1.2  to 1.5 ha/hr

3.

General Information

:

The unit consists of two inner blades of size 100 cm x 25 cm and two outer blades of size 130 cm x 25 cm.  The front portion of the two inner blades are joint together such that they form an angle of 30° in between them.  At the junction of these two inner blades a cultivator shovel  is fixed to penetrate into the soil.  The inner blades can be mounted 5 to 10 cm lower than the outer blades so that they form a furrow at a lower depth than the surface of the bed for the flow of irrigation water.  The two outer blades are placed one on each side of the inner blades and at an angle of 60° to the direction of the travel.  The soil collected in 105 cm width is formed as bund of size 35 cm on both the sides of the irrigation furrow formed by the inner blades. 

4.

Cost of the unit (Approx)

:

Rs. 12000/-

5.

Salient features

:

Cost of forming irrigation channel at 5 m interval by
  • Channel  former          : Rs. 165/ha.
  • Manual labour             : Rs. 385/ha.
  • Saving in cost             : Rs. 220/ha
  • Saving in time             : 11 man days/h

 
| Home | Schemes | Subsidy | Indigenous Tools | Imported Machineries | Custom Hiring | Training | Manufacturers | Dealers | Gallery | FAQs & Queries | Contact |
© TNAU 2008 - 2024 All Rights Reserved.