Farm Machineries

Chaff cutter

	Hand operated chaff cutter
It works on Manual. It gives the length of cut 3/8” to ½” and 1/2” to 5/8”. Before starting the machine, fill the main gear box with 200 to 250ml. lubricating oil No.90 and the outer gear box with 100 to 150ml. lubricating oil No.90. Never use blank oil any used oil. Always keep the blades sharp. Keep a distance of 1/16” or 1.5mm between blade and mouth piece.

Motor operated chaff cutter (2 roller with motor)

It works on 1 H.P. electrical motor.
RPM required is 1440.
The weight of machine is 95 kilo gram.
The cutting capacity of this machine is 250- 300 kilogram per hour.
It gives the length of cut 3/8” to 1/2“ and 1/2” to 5/8”.
Before starting the machine, fill the main gear box with 200 to 250ml. lubricating oil No.90 and the outer gear box with 100 to 150ml. lubricating oil No.90.
Never use blank oil any used oil.
Always keep the blades sharp.
Keep a distance of 1/16” or 1.5mm between blade and mouth piece.

Motor operated chaff cutter (3 roller with motor)

It works on 1.5 H.P electrical motor.
RPM required is 1440.
The weight of this machine is 125 kilogram.
It gives the length of cut 3/8” to 1/2“and 1/2” to 5/8”.
The cutting capacity of this machine is 400-500 kilogram per hour.
Before starting the machine, fill the main gear box with 200 to 250ml. lubricating oil No.90 and the outer gear box with 100 to 150ml. lubricating oil No.90.
Never use blank oil any used oil.
Always keep the blades sharp.
Keep a distance of 1/16” or 1.5mm between blade and mouth piece.

	Motor operated chaff cutter (heavy duty)
	It works on 2 H.P. electrical motor. The cutting capacity of this machine is 1000-1500 kilogram per hour. It gives the length of cut 3/8” to 1/2“and 1/2” to 5/8”. RPM required is 1000-1250. Before starting the machine, fill the main gear box with 200 to 250ml. lubricating oil No.90 and the outer gear box with 100 to 150ml. lubricating oil No.90. Never use blank oil any use oil. Always keep the blades sharp. Keep a distance of 1/16” or 1.5mm between blade and mouth piece.

Milking machine

	a. Hand operated milking machine
	Operating Vacuum : Manual Pump Operated (Adjustable) Milking Power : 1 – 4 Cows per hour No. of Can’s : One (Capacity of 15 Lits) No. of Operating Persons : One

	b. Motor operated Pistan type milking machine-YDH 1
	Machine model - YDH-1 Operating vacuum - 0.04- 0.05 Mpa (adjustable) Pulsation time - 64 times per minut Electricity need - 0.55 KW Voltage - 220 V or 380 V Milking capacity - 10-12 cows per hour Motor speed - 1440 rpm per minute Number of cans - one (capacity of 25 kg) Needed persons - one Teat cups - one set

	Motor operated Pistan type milking machine- YDH 2
	Machine model - YDH-2 Operating vacuum - 0.04- 0.05 Mpa (adjustable) Pulsation time - 64 times per minute Electricity need - 0.55 KW- 0.45 KW Voltage - 220 V or 380 V Milking capacity - 20-24 cows per hour Motor speed - 1440 rpm per minute Number of cans - two (each capacity of 25 kg) Needed persons - one Teat cups - two set

	Motor operated vacuum type milking machine-YD 1 Machine model - YD-1
	Machine model - YD-1 Operating vacuum - 0.04- 0.05 Mpa (adjustable) Pulsation time - 60-80 times per minute Pulsation rate - 60 / 40 Electricity need - 1.1 KW Voltage - 220 V or 380 V Milking capacity - 10-12 cows per hour Motor speed - 1440 rpm per minute Number of cans - one (capacity of 25 kg) Needed persons - one Pump capacity - 250 Teat cups - two set

	Motor operated vacuum type milking machine-YD 2
	Machine model - YD-2 Operating vacuum - 0.04- 0.05 Mpa (adjustable) Pulsation time - 60-80 times per minute Pulsation rate - 60 / 40 Electricity need - 1.1 KW Voltage - 220 V or 380 V Milking capacity - 20-24 cows per hour Motor speed - 1440 rpm per minute Number of cans - two (each capacity of 25 kg) Needed persons - one Pump capacity - 250 Teat cups - two set

Brush cutter

Engine mode l- Vcbc 2349 Engine type - 2 stroke engine, single cylinder and air cooled gasoline engine. 2 cycle IOL/ gasoline- 1:25 Engine displacement- 49 cc Maximum power speed- Diaphragm Starting method- recoil method/ Petrol. Blade- metal blade.

Feed grinding machine
This is a motor operated machine. It is capable of grinding of all feed ingredients such as maize, wheat, broken rice etc., into fine ground mixture concentrate feed. It is easy to operate and handle. It is easily available with all farm machinery suppliers.